Fire Alarm System

Product Details:

Product Detail:
This is basic type of Conventional Fire Alarm System which is suitable for small areas and small establishments. This system devices the area in zones and multiple devices can be installed in one zone. Main controller and design of fire detection and alarm system is chosen according to the area and requirement of detectors.

Additional Information:

• Item Code: FIREDETECTORSSAFETYSYSTEM
• Production Capacity: 50000
• Delivery Time: IMMEDIATE
• Packaging Details: COMPLETE SYSTEM SUPPLY, INSTALLATION, TESTING, COMMISIONING, AMC AND MAINTENANCE OF FIRE ALARM SYSTEM.

Product Details:

This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s intelligent addressable fire systems. All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors, part 5 for heat detectors and part 17 for short circuit isolators). The optical sensor (CAP320) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles. The photo-thermal sensor (CAPT340) will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC. The CAPT340 has day/night modes available, programmeable from the site installer software. The day mode uses the heat aspect of the sensor for areas which may have smoky environments during, for example working hours. The night mode uses a combination of A2S and smoke detection. If not programmed, the sensor defaults to dual mode. The heat sensor (CAH330) can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.

Product Details:

NOTIFIER FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. Notifier FSP-951T is Multi Sensor having Smoke Detection and Heat Detection technology and is supplied with base B501 as a set for Mouting in Ceiling as per the Honeywell Guidelines. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both Flash Scan and CLIP applications as designated.

Product Details:

Notifier Fire Alarm Detection System
Supply of Notifier Controllers & Smoke DetectorsInstallation & Commissioning of Notifier Control PanelsMaintenance Services for Notifier Fire Alarm SystemAMC Service for Notifier Fire Alarm Control Panels & Detectors

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This is the intelligent type of Addressable Fire Alarm System which provide complete control of your premise with each and every device marked with the name of the particular area to address in case of emergency.

Intelligent Addressable Fire Detection & Alarm System is suitable for multi-story buildings, large establishments, critical areas like healthcare facilities and much other business and non-business premises.

Combinations of Intelligent smoke detectors, heat detectors, manual fire call points, sounders, different integration modules and main control panel forms a good fire alarm system with all the facilities to work standalone and integrated with other systems like: AHU, AC Chiller System, Main Electricity Control panel, Door Access Control System, Barrier Access Control System, Fire Suppression System (Sprinkler, gas Flooding etc.), Lifts Controller and Building Management System.

All the events of the fire, system use, and tampering can be recorded in fire panel memory and can be printed or take out a file.

Additional Information:

• Item Code: FASHONEYWELL
• Production Capacity: 500000
• Delivery Time: IMMEDIATE
• Packaging Details: COMPLETE SET WITH ADDRESSABLE FIRE ALARM PANEL, MODULES, SMOKE SENSORS, HEAT DETECTORS, ISOLATORS, MCP AND HOOTER SOUNDER

Product Details:

The CF1000 range is available as a high specification 1 or 2 loop intelligent addressable control panel, offering sophisticated functionality with simple end user operation. The simplicity of operation, powerful cause and effect programming capability and competitive pricing make the system suitable for a wide range of small to medium sized projects. CF1000 uses soft addressing to minimize installation time and remove the potential for error associated with manual addressing. These panels can operate as a standalone panel or as part of a network with the Eaton range of CF3000 panels or other CF1000 panels (additional network card required). The CF1000 range of panels have an integral power supply and are supplied with batteries as standard. An extensive range of compatible intelligent addressable system ancillaries are available to work with the CF1000 range all of which incorporate an integral short circuit isolator to provide maximum protection against short circuit faults on the loop.

Additional Information:

• Item Code: DISTRIBUTORAUTHORISEDDEAELRSUPPLIEROFCOOPERFIREPANECF1000
• Production Capacity: 1000
• Delivery Time: IMMEDIATE
• Packaging Details: COOPER FIRE ALARM CONTROL PANEL CF-1000 ALONG WITH SMOKE DETECTOR, HEAT DETECTOR, BEAM DETECTOR, REPEATER PANEL, FAULT ISOLATOR, MONITOR MODULE, CONTROL MODULE AND GRAPHICS SOFTWARE.

Product Details:

Conventional manual call point is an emergency alerting device which can be activated by pressing a transparent plastic window on its front side. The call point once activated can be reset by press. Agni MCP is designed for use with conventional fire alarm control panels and alarm loop by installing the module conventional zone module. ABS Plastic Manual Call Point allows the fire alarm control panel to monitor the conventional call point devices. Agni Fire Alarm MCP has Ingress Protection Rating IP23 and Maximum Voltage of 30 VDC with Operating Temperature of -10 Degree Celsius and +55 Degree Celsius. Wall Mounted Manual Call Points are Used with Resettable and Break Gl;ass Type of Devices with Ky to Reset the Conventional Fire Alarm System. 

Product Details:

We are the distributor of cooper fire alarm system and eaton cooper fire safety control panel, detectors. Hooter , mcp, repeater panel. Graphics sofwtare and manual call points etc. We are the supplier of cooper fire alarm items on apan india basis. Call us for all types of cooeprs fire alarm devices and modules.

Product Details:

Being the prominent firm, we have been capable to provide to our customers a qualitative series of Voice Alarm System. These are available in varied configurations and sizes.

Additional Information:

• Item Code: VOICEALARMCONTROLLERAMCSERVICEREPAIRMAINTENANCE
• Production Capacity: 50008
• Delivery Time: IMEMDIATE
• Packaging Details: COMPLETE SYSTEM WITH CONTROLLER, AMPLIFIER, MIXER, SPEAKERS, TALK BACK DEVICES, ANNOUNCEMENT SYSTEM ETC.

Product Details:

Product Detail:
We implement Public Addressing System for all types of premises, starting from the basic PA system we provide analog & digital type of solutions.We work in the rage of public address speakers, MIC, Amplifiers, Mixers, and recorders to fulfill the requirements of addressing of a premise or playing the desired audio within the premise.In case of emergency, necessary manual or prerecorded announcements can be made through the PA System and this can be integrated with fire alarm system for automatic pre-recorded safety announcements as soon as the fire alarm is raised.


Depending upon the area type of ceiling and size of rooms, halls speaker type and size is decided to produce the desired level of sound and a combination of amplifiers, input mic, recorder, and rack etc. make a good reliable solution for the user.