Goldline Security Systems

HID Reader Door Access Control System

• High Security Access Control System from HID
• Best Card Readers & Cards in HID
• I Class HID Card & Reader Technology
• Supply, Installation & Commissioning of HID Door Access Control System with Control Panel
• HID Building Door Access Security System AMC & Repairing Services

Having Hid Card Reader For Your Door Security And Identification Is The Best Idea To Secure Your Premises. Hid Card Raeders Are Available In Proximity Rfid Nfc 125 Khz Technology, Smart Card 13.56 Mhz Technology With Programmble Cards And Diffrent Read Ranges As Per The Customer Requirement. Hid Proximity Card Reader Comes With Clamshell Hid Rfid Cards And Widely Used In Small Medium And Large Organisations. Hid I Class Smart Card Reader Series Has Many Card Reading Oprions And Card Types A Sper Memory And Card Formats. Hid Ic Lass Cards Are Vailabe Srating From 1K Memory Up To 64K As Per The Convergence Of Applications And Cororate Format Of Programing Is Required. We Design Complete Solution On Hid Platform For Building Door Automation And Control For Consulatants, Architechts And Interior Designers. Call Us For Mor Information And Your Current Requirements. After Sales Support Service Repair And Maintenance Of All Types Of Hid Readers Locks And Controller Is Done By Our Tem Of Expreinced And Trained Engineers As And When Is Required. 

Network Rack Access Control Systems provide control over front and rear doors of Network and Server Racks having Finger Card PIN Password or Face Identification System in Place to Verify the Authorised users for Security and Protection of each and every Rack in the Network Hub or Server Room. We provide complete Data Centre Security Safety Automation including server main door security network rack security and Fire Protection of the Network Racks using Advance GAS Suppression System using Panel Tubes. 

Advance Rack Access Controllers protect both Rear and Front Doors of Rack using Electronic Locking arrangement and Front Use Biometric Fingerprint Card PIN and Face Scanning Mediums to identify the right persona and reject all others which is available with only one feature of them or all in one as per the security level sensitivity of data and site conditions.

HID  V2000 Reader Interface Networked IP Controller is 2 Reader 2 Door Controller works for Single Door if Entry Exit Reader are used on the both side of doors. HID EVO V2000 Multi Door Controller is a Wiegand Controller Supports 26 Bit, 32 Bit, 35 Bit Readers.

HID Global’s Networked Access Solutions provide an open architecture development platform that enables HID’s software partners to deploy a wide variety of versatile access control systems that protect their customers’ hardware investments.

As part of HID Global’s Networked Access Solutions, VertX EVO V2000 is a two-reader access control panel that enables interface with two doors (single reader) or one door (in/out reading).
VertX EVO V2000 handles all online door decisions, door input monitoring and output control and reader interface for up to two doors. The EVO V2000 has two inputs per door for door monitor and REX, and 2 outputs per door for lock and AUX. Additionally the solution has three inputs for AC power fail, Battery power fail and Tamper. The EVO V2000 is powered by a local power supply (12 or 24 VDC).

VertX EVO solutions are created for both on-site system administration as well as service oriented off-site solutions, depending on the OEM software provider’s total solution.
Providing access to a complete ecosystem of partner solutions, VertX EVO enables customizable products that leverage the unique power of individual software provider offerings.

hid r40 i class smart card reader is powerfully secure versatile new technology reader with wiegand clock-and-date and osdp open suprevised device protocol via 485. Hid smart card reader in se iclass technology offers secure identity object sio in iclass seos with mifare desfire ev1 and mifare classic card support. Hid r40 smart card reader complies to iso14443a mifare csn, iso14443b and iso15693csn with mifare desfire ev2 card compatibility. Hid r-40 is operated on 13. 56mhz medium frequency having ip65 environment protective encosure ratings. Hid r 40 iclass reader has ul 294us  fcc ic rcm ce srcc ida and mic japan etc. International certifications which ensures the highest quality encryoted card reader devices having indoor outdoor installation options with secure algoritham.

Honeywell Smart Card Raeder OM30BHOND is Omniclass Contactless Smart Card Multi Technology BLE Reader with 13.56 MHZ Secure Smart Card Reading Capability and HID iClass Card Reading Support. Honeywell Omniclass Smart Card Reader OM30 is Wiegand Reader with Smart Card technology which is Ideally Suited for Access Control System, logical PC access, storage of biometric templates, parking secure ID’s with embedded tamper-proof digital photos, ePurse and many other applications requiring secure and reliable read or write cards. Honeywell OM30BHONS Reader is Supported by Pro3000, NX4PCB, Prowatch and Certain HID Controllers with Wiegand 26 Bit 32 Bit 34 Bit or 35 Bit Data Connectivity. Honeywell Smart Card Reader Omnicalss Series Consisting Models OM15BHOND OM15BHONDT OM30BHOND OM30BHONDT OM40BHOND OM40BHONDT OM45BHOND OM45BHONDT OM55BHOND OM55BHONDT provide a secure environment by restrciting the door by electronic locking and limited premises control. Honeywell Multi Calss Card Reader Series Include Models OM16BHOND OM16BHONDT OM31BHOND OM31BHONDT OM41BHOND OM41BHONDT OM46BHOND OM46BHONDT OM56BHOND OM56BHONDT which Supports not only 13.56 Mhz Smart Card Technology but Also can Access 125Khz HID Proximity Cards. 

HID Mercury LP Series Intelligent Controllers are HID Global’s next generation advanced access control platform that runs on embedded Linux. The enhanced platform offers an improved processor and increased memory, plus feature an embedded crypto memory chip that provides a secured layer of encryption to on board sensitive data. Built on the HID Mercury open platform, LP Series controllers provide the necessary flexibility for OEMs, channel partners and end customers to choose the controller configuration that best fits their needs.
The multi-port LP1502 is a 2-4 card reader panel for controlling two connected doors and managing up to 64 doors/openings. Built on the HID Mercury platform, the intelligent controller uses on-board Ethernet port to connect to cloud or server based access control hosts. The intelligent controller performs access control, alarm management and scheduled operations all in s single package.

HID Mercury LP1502 Intelligent Controller works with native connectivity, the high-performance LP1502 functions independently of the host for performing numerous access control applications and supports OSDP, OSDP Secure Channel, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies. System configuration and setup are provided through HID Mercury OEM partner software applications.

For partners seeking a comprehensive and open access control platform, and a reliable hardware platform running in a secure environment, the LP1502 is the clear solution. It delivers a complete security and access control solution as well as innovative application extensions, interoperability and data security.

Credential Capacity: 250,000

Credential Number Size: Up to 64-bits with 15-digit PIN MAX

Transaction Buffer: 50,000

Access Levels: 32 per credential (per reader schedule); plus custom credential override

On-Board Access Point Control: Up to 2 access points with on-board IO

On-Board Reader Support: Up to 4 (OSDP multi-drop) or 2 (Wiegand) with on-board IO

Maximum Access Points : 64 (using X100 or V100 IO modules)

Maximum Readers: 64 (OSDP or Wiegand, regardless of IO module configuration)

Maximum Inputs: 615 (using X200 or V200 IO modules)

Maximum Outputs: 388 (using X300 or V300 IO modules)

Number of IO Module Buses: 2 (each dedicated to either Aero or VertX IO modules)

Maximum Aero IO Modules: 32 each IO Module bus can support up to 32 Aero modules

Maximum VertX IO Modules: 32 each IO Module bus can support up to 16 VertX modules

Data Input Power: TTL compatible or 2-wire RS-485

OSDP Mode: 9,600 to 230,400 bps, asynchronous, half-duplex, max cable 2000 ft (609.6 m)

LED Output (Wiegand): Open Collector, 12 Vdc open circuit maximum, 40 mA sink maximum

Beeper Output (Wiegand): Open Collector, 12 Vdc open circuit maximum, 40 mA sink maximum

Contact us for Distributor of HID Access Control Panles and Access Card readers, Design Consultancy for Small Medium abd Large Building Porjects, AMC, Maintenance & Repairing of the HID Door Access Control system.

HID Proximity Prox Point Plus 6005 Wiegand Card Reader is most powerful Card Scanning and Door Entry Identification System having 26 Bit Interface and Data0 Data1 Connectivity with 12V Operating with small Red Green Multi Colour LED Indication for Card Access Granted. HID 125khz Reader is Supplied with Prox Card II type of Access Card as a complete set of 2 Reader 2 Door Controller, Time Attendance Web Based Multi User Software and Electromagnetic Locks, Emergency Door Release and Push Buttons.

HID Mercury Intelligent Controllers has LP Series MR Series with 3 Input Output Modules and MS M5Bridge Products. Built on the HID Mercury open platform, LP Series controllers provide the necessary flexibility for OEMs, channel partners and end customers to choose the controller configuration that best fits their needs. The Linux-based controller family offers support for the latest cyber security standards, robust platform of reliability, and a seamless upgrade for customers. The latest generation door interface module for HID Mercury intelligent controllers and the platform of choice for customers seeking open architecture access control solutions. These modules enable system expansion of HID Mercury intelligent controllers as part of HID Mercury distributed architecture.

Designed for interoperability with legacy third-party access control systems, bridge products are shaped from the existing HID Mercury controller platform and are designed to fit the specific physical parameters of products. These screwdriver- less plug & play modules retrofit legacy panels so that upgrading to an open, reliable, and flexible HID Mercury controller significantly reduces the cost of the overall system migration.

 HID Mercury LP multi-port LP1502 is a 2-4 card reader panel for controlling two connected doors and managing up to 64 doors openings. Built on the HID Mercury platform, the intelligent controller uses on-board Ethernet port to connect to cloud or server based access control hosts. The intelligent controller performs access control, alarm management and scheduled operations all in a single package.

In HID Mercury Range of Controllers native connectivity with the high-performance LP1502 functions independently of the host for performing numerous access control applications and supports OSDP, OSDP Secure Channel, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F 2F and supervised F 2F reader technologies. System configuration and setup are provided through HID Mercury OEM partner software applications.

The LP2500 is a powerful intelligent controller with native network support and is scalable to 64 doors/openings. Built on the HID Mercury platform, the intelligent controller uses an on-board Ethernet port to connect to cloud or server based access control hosts. The intelligent controller performs access control, alarm management and scheduled operations all in a single package.

HID Mercury LP2500 Controller is Capable of elaborate processes and procedures without host intervention, the intelligent controller, once programmed, can function independently of the host. System configuration and setup are provided through HID OEM partner software applications.

The LP4502 supports a variety of extended features including High Assurance Credential Authentication and complies with the BACnet IP communication protocol. A USB-to-Ethernet IP adapter provides a redundant host IP connection. It has direct hardware support for 2 openings and can scale to 64 access points. Built on proven HID Mercury hardware, this high-performance intelligent controller embeds elevator destination dispatch and provides integrated power management analytics to proactively detect failure before it occurs.

HID Mercury Series Controllers Support 240000 and 600000 cardholder Capacity 50000 transaction buffer with POE Network Power Connectivity and and Supports 2 RS485 IO Protocols. HID Mercury Intelligent Controller has UL294 FCC Part 15 Class A CE RoHS Compliance and 255 Access Level Per Cardholder.

HID V1000 Controller is a high-performance, scalable access control device designed to serve as the backbone of networked security systems. Supporting up to 32 doors with modular expansion, the controller natively manages 2 doors and 2 readers while enabling seamless integration with additional interface modules like the HID V2000 or V300. The device is compatible with multiple reader technologies, including Wiegand, OSDP, and RS-485, ensuring flexibility across various system requirements.

Equipped with advanced security protocols, the HID V1000 features encrypted communication channels to safeguard data and prevent unauthorized access. It supports configurable access control rules such as anti-passback, time zone restrictions, and event-triggered actions, making it ideal for high-security environments. Built-in Ethernet connectivity facilitates remote management and real-time monitoring, while its powerful processing capabilities ensure fast and reliable operation.

The V1000 includes multiple inputs and outputs for auxiliary devices, such as alarms, door position sensors, and locking mechanisms, enhancing its adaptability to different applications. Designed for robust 24/7 performance, the controller complies with industry certifications such as UL294, CE, FCC Part 15, and RoHS, ensuring quality, safety, and environmental compliance. Its rugged construction makes it suitable for deployment in demanding environments such as corporate offices, industrial facilities, government buildings, and residential communities.

Key features also include support for offline operation to maintain door access even during network interruptions, LED indicators for diagnostic feedback, and modular scalability to grow with evolving security needs. The HID V1000 is a reliable, feature-rich solution that meets the demands of modern access control systems.

HID Access Control System is standard Certified Hardware and software combination for multi door Security and control over each and exit by identifying the correct authorized persons through Access Card, Mobile virtual card SEOS access or access via Biometric Fingerprint Access Control Devices.  HID 2 Reader 2 Door Controller makes your premises Door Entry very Secure and Accountable by installing I Class Smart Card Readers or Proximity Card Readers having Em Lock EDR and Push Button Connectivity. HID  Multi Door Controller Provides a User Capacity of 1000 Users 3000 Card Capacity and 100000 Event Log Transactions Recording. HID ACW2-XN 2 Reader Controller has inbuilt Wiegand Interface Module, Power Supply & Metal Enclosure or Box. HID ACW2XN is advance Multi Door Controller Supporting 4 Expandable AW2 Expansion Modules with 10/100 Network Communication Interface Serial Interface RS485 and 2 Weigand Readers with 12V DC Output. HID Controller ACW2 has maximum Product Warranty Support and with HID Access Manager Access Control Software for Configuration of HID Door Card Readers Like R10, Proxpoint Plus 6005 and HID Proxpro 5355 and Other HID Biometric Readers.  

We are the manufacturer supplier and installation service provider for lift access control system. We at GSS provides biometric fingerprint access control system along with card access pin password and face scanning as per the requirement for push button panel lift, touch panel advance lifts in Lift Door Control or Inside COP Panel Control Configurations. Our Elevator Access Control Solutions are made with high quality standard hardware and latest technology algorithms to control entry to the elevator for unauthorised persons. GSS Lift Security Access Control system is suitable for society multi floors lift, personal single owner lifts builder flats building, office buildings having all types of solutions available as per the customer requirements.

Mercury MP1501 Intelligent Controller is an advanced and highly flexible solution designed for modern access control systems. Some of its standout features and benefits include:

1. Open Architecture:

   • Offers a high-performance, reliable platform that supports integration with various Mercury OEM partners’ software solutions.

2. PoE+ Powered:

   • Simplifies installations by providing both network connectivity and power (for controllers, readers, locks, etc.) via a single PoE+ connection, reducing the need for traditional power supplies.

3. Cybersecurity & Reliability:

   • The MP1501 includes advanced security features like ARM TrustZone, secure boot CPU, crypto chip, and data-at-rest encryption. It’s built to provide layered security to protect sensitive data.

4. Expandable and Scalable:

   • Supports up to 17 doors/ openings by expanding with serial I/O modules or MR62e door controllers.
   • Ideal for scalable, edge-based intelligent access control.

5. Advanced Local Processing:

   • The controller can operate independently from host servers to manage local access control, supporting a variety of card formats, paired and alternate readers, as well as biometric devices.
   • Features anti-passback and programmable keypad user commands.

6. Enhanced Cybersecurity:

   • Features advanced encryption, including support for TLS 1.2/1.3, AES-256/128, and mTLS for secure communications.
   • FIPS 140-3 compliance (in process) further strengthens its security posture.

7. Business Continuity:

   • Built for longevity with a multi-year support program and dual footprint designs.

8. Easy Installation:

   • Power-over-Ethernet (PoE) makes installation straightforward, and the controller fits into standard 3-gang boxes for easy deployment at the door.

• Power Input: PoE (12.95W), PoE+ (25W), or 12V DC
• Memory/Backup: Super Capacitor (10 days), Lithium Backup Battery available
• Capacity: 240,000 cardholders, 500,000 transaction buffer
• Networking: Ethernet 10BaseT/100Base-TX, supports IPv4/v6
• Expansion: Supports up to 17 readers/openings with additional I/O modules
• Operating Temperature: 0° to 70°C
• Compliance: UL 294, FCC, CE, RoHS, and more
• Warranty: 1-year warranty on materials and workmanship

This controller delivers high performance, flexibility, and robust security, making it suitable for various access control needs across industries. Its intelligent, edge-based processing power is well-suited for organizations looking to build future-ready security systems.

Would you like to discuss this product further for a potential application in your projects, or do you have any specific questions on its capabilities...

HID 2 Reader 2 Door Controller Vertex Evo V1000 model is the most commonly used UL Listed Product of HID Corporation for Door Access Control Elevator Access Control and Lifts Security and Monitoring with Web Based Time Attendance and Door Access Control Sofwtare.

 HID Global’s Networked Access Solutions provide an open architecture development platform that enables HID’s software partners to deploy a wide variety of versatile access control systems that protect their customers’ hardware investments.

As part of HID Global’s Networked Access Solutions, VertX EV V1000 is a multi-door access control panel that reduces the burden on corporate LANs by connecting up to 32 door controllers using only one IP address.

VertX EVO V1000 handles all online door decisions, input monitoring and output control for all connected interface modules. The solution has two on-board inputs and outputs for local input point monitoring and auxiliary output control, and is powered by a local power supply (12 or 24 VDC). VertX EVO V1000 works with standard VertX V100 door interface, V200 input monitor and V300 output control interface modules.

VertX EVO solutions are created for both on-site system administration as well as service oriented off-site solutions, depending on the OEM software provider’s total solution.

Providing access to a complete ecosystem of partner solutions, VertX EVO enables customizable products that leverage the unique power of individual software provider offerings.

HID multiCLASS reader line provides enhanced security through mutual authentication and data encryption. HID, Indala and other popular proximity technologies are supported by multiCLASS. Save on system configuration costs by keeping system upgrade simple. Whether reading proximity, iCLASS or multi-technology cards, identical user identification data formats are sent to the panel. Unlike competitor products, HID multiCLASS readers support all HID and Indala Proximity formats, including Corporate 1000, long and FlexSecur. Only the multiCLASS family of products provides true iCLASS security, the ease of proximity technology, the power of smart cards and the confidence of choosing HID the worldwide leader in access control. multiCLASS  family of card readers is designed for customers upgrading their current card system from the most popular proximity technologies to iCLASS® credentials. With the RP40, RPK40 and RP15 readers, the customer has the ability to transition to smart cards over time while incorporating the use of multiple card technologies within a single building or across multiple facilities.

Recommended

• Cable, 5-9 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL      approved, Belden3107A or equivalent (OSDP)

• Linear DC power supply

• Metal or plastic junction box

• Security tool (for anti-tamper screw) HID 04-0001-03

• Drill with various bits for mounting hardware

• Mounting hardware

• Reader spacer when mounting on or near metal or metal junction boxes - see How to Order Guide

• IP65 Mounting gasket, recommended for outdoor installation

• Back box

HID iCLASS Access Cards represent a pinnacle of security and efficiency in access control Show Card Technology, leveraging 13.56 MHz smart card technology to provide superior encryption and authentication. Among the various models offered, the HID iCLASS 2000CGGSN, 2002CGGSN, 2080CMSSV, 5006VGGSN, and 100PGGNN cards stand out for their versatile applications, reliability, and high security.

The 2000CGGSN is a high-performance smart card designed to work seamlessly with advanced access control systems. It integrates 13.56 MHz iCLASS contactless smart card technology, offering secure and rapid access for authorized individuals. The card’s enhanced security features are built on mutual authentication, making it a reliable choice for environments that require high-level protection, such as corporate offices, healthcare facilities, or government buildings.

Similar to the 2000CGGSN, the 2002CGGSN card is a next-generation access card with improved features and security protocols. This card also operates on 13.56 MHz frequency and provides seamless integration with existing HID iCLASS systems. It’s engineered for organizations looking for a high level of control and flexibility. The 2002CGGSN is known for its durability, making it suitable for high-traffic areas where frequent use is expected.

The 2080CMSSV is a multi-purpose iCLASS smart card, offering advanced capabilities for more demanding environments. Its 13.56 MHz technology ensures fast, secure, and convenient access while maintaining a high level of privacy and data protection. This card is highly customizable, allowing organizations to embed additional features such as personal identification, making it an excellent option for businesses requiring an integrated security and identity solution.

Designed for versatile use, the 5006VGGSN combines the power of 13.56 MHz iCLASS technology with a robust design that withstands tough conditions. This card is commonly used in both access control and secure transactions, offering quick data transfer rates and reliable authentication. The 5006VGGSN is well-suited for environments such as universities, hospitals, and industrial sites, where flexibility, security, and durability are critical.

The 100PGGNN is an entry-level iCLASS smart card that provides a high level of security and is ideal for general access control. It utilizes 13.56 MHz frequency to ensure secure communication and offers a robust, cost-effective solution for organizations just beginning to implement smart card technology. This card delivers reliable performance with secure access to facilities, making it an excellent choice for small to medium-sized businesses or educational institutions.

Each of these HID iCLASS smart cards is built on 13.56 MHz RFID technology, ensuring fast, secure, and contactless access. The system is designed with advanced encryption, ensuring that sensitive data remains protected. With the integration of mutual authentication, iCLASS cards prevent unauthorized access, making them ideal for high-security environments.

Whether you need a card for general access (100PGGNN) or more complex, feature-rich solutions like the 2080CMSSV, HID iCLASS cards cater to a wide range of access control needs. They are durable, customizable, and provide seamless integration with various access control systems. Furthermore, these cards offer scalable solutions, allowing organizations to upgrade their security as their needs evolve.

HID iCLASS Proximity Card 2120BGGMNM is a thin combination card operating at 13.56 MHz iCLASS contactless smart card and 125 kHz proximity frequencies, designed for physical access control and multiple secure applications. The card is available in PVC cards (2020, 2021, 2022, 2023, 2024) and composite PVC/PET cards (2120, 2121, 2122, 2123, 2124), supporting all 2K bit (256 Byte), 16K bit (2K Byte), and 32K bit (4K Byte) iCLASS credentials. 2K bit cards have two application areas, allowing one for the HID standard access control application and one for user customization, compliant with ISO 15693 for contactless communications. 16K and 32K bit cards provide sufficient read/write memory to store multiple biometric templates, support multiple securely separated files for various applications, and meet ISO 15693 and 14443B standards for contactless communication. iCLASS Prox Cards combine contactless smart card and proximity technology with optional magnetic stripe, barcode, anti-counterfeiting features, or photo ID directly on the credential. Applications include access control, network log-on security, automotive vehicle identification, cashless vending, time and attendance, biometrics, public transportation, airline ticketing, and customer loyalty programs. The card supports high-speed, secure communications with mutual authentication, encrypted data transfer, and 64-bit diversified keys, with any existing HID format factory or field programmable. It meets ISO thickness standards for use with direct image and thermal transfer printers, providing a secure, flexible, and future-proof solution for physical and logical access management.

Mobile NFC & Bluetooth Card Reader Smart Door Access Control Security Locking System is the Most Advance Type of Door Entry Control System used for Office Building Entry Doors Gates and Home Door Security Door interlocking. Mobile Key Card Electronic Automatic Door Locks Support EM Locks latch Locks Drop Bolt Locks and Digital Card Biometric Fingerprint Door Locks. We are the Manufacturer of Digital Door Locking System with Card Swiping through Android Mobile Phones. Smart Door Intelligent Access Control Security System Allows you to use your Own Smartphone as a Key to Access Office and Home Secure Door Locks by using your Smartphone as a Smart Card Tag having Permission in the System to Enter by Just Twisting the Mobile in front of Wireless NFC Bluetooth Door Card Reader. Mobile Access Card Reader Door Access Control System is fast and Contactless Solution which Supports Mobile App Both through NFC BLE through Remote Management by Web Application.

We are hid authorised supplier and service provider company for all types of card reader devices. Hid proximity card readers are commonly used in verious door access control, lift access control, printer access control, vending machine access control and parking access control etc. Some of the customers use hid card reader and controllers for attendance marking with third party software which are compatible with hid devices. Hid proximity access control system works on lf 125 khz and reader has a read range of 6-8 centimeters. Hid proximity cards are available in weigand connectivity ranging 26, 28, 35 or 48 bit formats of data transfer to the controlller. Hid technology is unique and provides two level verification of cards on proximity card reader, one is card number and second is facility access code or fac. Call us for more information on hid products and services.  

 
The ProxPro proximity card reader is weatherproof design and architecturally attractive enclosure allows easy mounting indoors or outdoor. The ProxPro Reader is ideal for applications requiring a larger read range. Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.  Features multicolor LED, internal or host control of the LED or beeper and a beeper off switch for silent operation. Provides Wiegand protocol interface compatibility with all standard access control systems. Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass using the optional glass mounting kit. For a longer read range, try the new generation ProxPro Reader, which provides an additional inch (2.5 cm) of read range, requires just 10 volts for operation, and is lower-priced than the Maxiprox Reader. HID 5355 proximity Reader Operates at 125 KHZ Frequency and a Read Range of 8 Inches or 20.3 cm. HID Proximity Reader 5355 with keypad is UL Listed Product with UL294, CUL & FCC Certifications and it supports Weigand, Clock Data, RS 422, RS232 Interfaces.