Goldline Security Systems

NOTIFIER FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. Notifier FSP-951T is Multi Sensor having Smoke Detection and Heat Detection technology and is supplied with base B501 as a set for Mouting in Ceiling as per the Honeywell Guidelines. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both Flash Scan and CLIP applications as designated.

The CF1000 range is available as a high specification 1 or 2 loop intelligent addressable control panel, offering sophisticated functionality with simple end user operation. The simplicity of operation, powerful cause and effect programming capability and competitive pricing make the system suitable for a wide range of small to medium sized projects. CF1000 uses soft addressing to minimize installation time and remove the potential for error associated with manual addressing. These panels can operate as a standalone panel or as part of a network with the Eaton range of CF3000 panels or other CF1000 panels (additional network card required). The CF1000 range of panels have an integral power supply and are supplied with batteries as standard. An extensive range of compatible intelligent addressable system ancillaries are available to work with the CF1000 range all of which incorporate an integral short circuit isolator to provide maximum protection against short circuit faults on the loop.

Notifier Fire Alarm System is one of the best fire safety solutions having addressable intelligent smoke detectors heat detector hooter sounder flasher monitor modules control modules single loop, 2loop, 4loopp, 8 loop and up to 10 loop control panels for controlling and monitoring the complete building along with Repeater panels or mimic panels. Honeywell Notifier Fire Alarm panels comprise to UL and EN Standards which can be networked with Notifier Building Fire Alarm Control and Monitoring Graphics Software. Contat us for all your fire alarm systemn design and supply in Honeywell Notifier.

Cooper Fire Alarm System is capable of handling Fire Safety of small medium and large Spaces having Intelligent Addressable Controllers Beacon Sounder Flasher Devices and Manual Call Points. Eaton Cooper a large electrical and fire group maintains a great reputation of Fire Detection Products and Solutions in the Market. Cooper Smoke Detection System provides highest Photoelectric Sensing Output to Optically Sense Smoke Particles using Advance Photoelectric technology. Cooper Fire Alarm Control panels are available in UL EN54 LPCB VDS CPD and BOSEC International Standards of Fire Safety and Control. Cooper Fire Alarm System Origin Country is UK and it is being used in all types of Projects throughout the India.

Looking for the GST fire alarm system solutions with top-notch certifications and reliable Hardware. Goldline Security Systems (GSS) is your trusted GST Fire Alarm System distributor. We offer a wide range of high-quality products, including 1 Loop, 2 Loop, and 4 Loop Fire Alarm Control Panels, smoke detectors, heat detectors, hoots, and manual call points (MCPs) – all designed to meet international safety standards.

• Control Panels: Available in 1 Loop, 2 Loop, and 4 Loop configurations, our GST fire alarm control panels provide seamless integration, precise fire detection, and intuitive controls.
• Detectors: Advanced smoke detectors and heat detectors ensure early and accurate fire detection.
• Hooters and MCPs: Reliable hooters and easy-to-operate manual call points ensure quick evacuation and response during emergencies.
• LPCB & CE Certified: All GST fire alarm products comply with international safety standards, including LPCB and CE certifications, ensuring maximum reliability.

1. Advanced Technology: Each component of the GST fire alarm system is built with cutting-edge technology for superior fire protection.
2. Comprehensive Datasheets: Detailed technical specifications for all components, including the fire alarm control panels, detectors, hooters, and MCPs, are available for seamless installation and operation.
3. Custom Solutions: Tailored fire alarm system designs for residential, commercial, and industrial applications.
4. Expert Support: Professional consultation and after-sales services from an experienced team.

• Offices and Corporate Buildings
• Shopping Malls and Retail Stores
• Industrial Plants
• Hospitals and Healthcare Facilities
• Educational Institutions
• Residential Complexes

Upgrade your fire safety standards with GSS’s GST fire alarm systems. For more details, including datasheets and pricing, contact us today.

Notifier Fire Alarm Detection System is standard fire safety system with range of intelligent sensors and devices. Notifier provides complete solution for small medium and large size building structures by placing right detectors and sounder devices with Digital PA system for Emergency Announcements and Automatic Announcements.

Notifier Fire Alarm Control Panel provides flexibility to be connected to printers, LAN Network for Graphical Fire Alarm System Management Software on Computer, Integration of AC Chiller, Integration of Control Panel with Access Control system for automatic opening of doors to keep human life safe. Notifier Monitor modules and control modules makes it very convenient to connect any third party system to Notifier Fire Alarm Panels like NFS320, NFS640, NFS3030D with Additional Loop cards.

Honeywell Smoke Detector is a cutting-edge fire detection device designed for maximum safety and reliability, utilizing advanced photoelectric, optical, thermal, and heat sensing technologies to detect different types of fire hazards effectively. Available in multiple variants, including photoelectric smoke detectors for slow-smoldering fires, optical smoke detectors for enhanced accuracy, thermal heat detectors for rapid temperature rise detection, and multi-sensor detectors combining smoke and heat sensing for superior fire detection.

Honeywell fire detection system integrates seamlessly with essential components such as a detector base with an isolator, which prevents system-wide failures in case of a short circuit, and various control modules, including monitor modules that enable real-time status tracking and seamless integration with fire alarm systems. The Honeywell Fire Alarm Control Panel (FACP) acts as the central hub, managing all connected detectors and modules for efficient fire safety operations.

For a robust fire alarm setup, FRLS (Flame Retardant Low Smoke) fire alarm cables ensure safe and reliable signal transmission, reducing smoke emission in case of fire. These cables enhance system durability and compliance with fire safety standards. The entire Honeywell fire safety ecosystem provides a comprehensive, intelligent, and high-performance fire detection solution suitable for residential, commercial, and industrial applications, ensuring fast response, reduced false alarms, and enhanced safety.

Edward Fire Detection and Safety Systems Division Produces Intelligent Addressable Fire Alarm System for Premises Smoke and Heat Detection and Monitoring. Edward Fire Alarm Panel Range Starts from Basic 1 Loop 2 Loop 4 Loop 8 Loop and up to 10 Loop Fire Alarm Control Panel in Integration with Smoke Sensor Heat Sensor Monitor Modules Control Modules and Repeater Panels as per the Project requirements. Edward sensors range include photoelectric optical smoke detectors Beam detector for Large Height Structures and Thermal Heat Detectors Connected in Common Loop in Through Fire Alarm Cables. When it comes to Fire Alarm Safety System reliability is the key, Edward produces stronger hardware and accessories which makes your fire alarm system safer and reliable to use in all types of small medium and large structures. There are many wires and cables available in market to use in fire alarm system, here are some recommended types of the cables which can be used in fire alarm system: FLPR- This is Fire-Power Limited Riser Cable which is used in fire rated Structures and building. 
FLPR Shielded Cable- This is a special type of cable which is designed for fire alarm systems having additional aluminium foil coating for removing electromagnetic interference.
FRLS- Fire Resistant Low Smoke Fire Alarm Cable for Withholding the heat up to a limit and producing very low smoke in comparison of conventional type of cables. 

We are the Wholesaler of Notifier Fire Alarm System Controller Smoke Detector, Beam Detector, Multi Detector, heat Detector, Duct Detector, Modules Repeater Graphics Software and Accessories. Notifier by Honeywell Intelligent Addressable Fire Alarm Control range starts from Basic Single Loop Fire Alarm panel for Small Structure, 2 Loop Fire Alarm panel is Suitable for Small and Medium Structure and 3 to 10 Loop Fire Alarm Control Panels are suitable for Large Structure and Establishments. Honeywell Notifier Fire Detection Alarm System is Microprocessor Based Advance Intelligent Addressable Fire Alarm System with Photoelectric Thermal GAS Beam Optical Detection Sensors. Notifier Multi Loop Microprocessor Fire Alarm Controller Panels are capable of integrating third party solutions and can be connected to Graphics software for monitoring of multiple building or large area at single screen from centralised place for all events keeping safety audit reports ready for downloading and printing.

EST Edward Fire Alarm Detection System Produces Intelligent Addressable Smoke Detectors, Optical Sensors, Thermal Detectors, Heat Sensors, Fire Alarm Panels, Addressable Manual Call Point, Hooter Cum Flasher, Sounders, Control Modules, Monitor Modules, Multi Technology Detectors and Beam Detectors for Large Height Structures. Edward SIGA PS Addressable Detector Series is equipped with Advance Fire Detection Technology. We are the Distributor Wholesaler of Edward EST Intelligent Addressable Fire Alarm Controllers along with Graphics Software Integrated with Public Address and Voice Evacuation System with Automatic Announcements in case of Emergency.

ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANEL AVANI

2 AMPERE POWER SUPPLY RE-2APS

2 IDCS FIRE ALARM CONTROL FIRE ALARM CONTROL FIRE ALARM CONTROL PANEL RE-102

4 IDCS FIRE ALARM CONTROL PANEL RE-104

4 IDCSFIRE ALARM CONTROL FIRE ALARM CONTROL FIRE ALARM CONTROL PANEL RE-2554

5 AMPERE EXTERNAL POWER SUPPLY RE-5APS

8 IDCS FIRE ALARM CONTROL PANEL RE-2558

ADDRESSABLE BACK BOX FOR PULL STATION RE-717PMB

ADDRESSABLE CUM CONVENTIONAL PROPANE GAS LPG DETECTOR RE-396LP

ADDRESSABLE HEAT DETECTOR RE-317D-HL

ADDRESSABLE LOOP POWERED SOUNDER RE-24LS

ADDRESSABLE MODBUS CONVERTER RE-AMB

ADDRESSABLE MULTI SENSOR DETECTOR RE-317D-SHL

ADDRESSABLE SOUNDER BASE RE-314-EBS_DS

ADDRESSABLE LOOP SOUNDER RE-24LS

AGENT RELEASE PANEL RE-26GR

AGENT RELEASE PANEL RE-120GR

AMPLIFIER EK-721

AMPLIFIER EK-722

ANALOGUE ADDRESSABLE CONTROL MODULE RE-737MC

ANALOGUE ADDRESSABLE FIRE ALARM ACTIVE REPEATER PANEL 3- RE-517RP

ANALOGUE ADDRESSABLE FIRE ALARM REPEATER PANEL PASSIVE AVANI-RP-UL

ANALOGUE ADDRESSABLE FIRE ALARM REPEATER PANEL MONTII-RP

ANALOGUE ADDRESSABLE FIRE ALARM REPEATER PANEL PASSIVE AVANI-RP-UL

ANALOGUE ADDRESSABLE HEAT DETECTOR RE-337H

ANALOGUE ADDRESSABLE INPUT OUTPUT MODULE RE-737MX

ANALOGUE ADDRESSABLE ISOLATOR MODULE RE-737MI_R01

ANALOGUE ADDRESSABLE MANUAL CALL POINT RE-737M

ANALOGUE ADDRESSABLE MONITOR MODULE RE-737MM

ANALOGUE ADDRESSABLE MULTI DETECTOR RE-337SH

ANALOGUE ADDRESSABLE PHOTOELECTRIC SMOKE DETECTOR RE-337S

ANALOGUE ADDRESSABLE INPUT OUTPUT MODULE RE-737MX

AVANI CENTRALISED CONTROL MONITORING SOFTWARE AVANI-CMS-INDIA

BEAM DETECTOR EAZYBEAM

BI-DIRECTIONAL PROJECTION SPEAKER RE-LS30B

CONVENTIONAL AGENT RELEASE PANEL RE-25AR

CONVENTIONAL CARBON MONOXIDE (CO) GAS DETECTOR RE-386CO

CONVENTIONAL DUCT OPTICAL SMOKE DETECTOR RE-428DU-C

CONVENTIONAL FIRE ALARM CONTROL PANEL RE-900-SERIES

CONVENTIONAL HEAT DETECTOR RE-316H-2L

CONVENTIONAL MULTI SENSOR DETECTOR RE-316SH-2L

CONVENTIONAL NATURAL METHANE GAS DETECTOR RE-386NG

CONVENTIONAL PHOTO ELECTRIC SMOKE DETECTOR AND HEAT DETECTOR RE-326-SERIES

CONVENTIONAL PROPANE GAS (LPG) DETECTOR RE-386LP

CONVENTIONAL SOUNDER BASE RE-364BS

CONVENTIONAL SOUNDER HORN CUM STROBE RE-25SS

CONVENTIONAL SOUNDER HORN RE-24CS

CONVENTIONAL SOUNDER HORN RE-716SO

DIGITAL ALARM AND VOICE EVACUATION SYSTEM EKONICS

ETHERNET MODULE RE-517ME

EXPANDER EK-700-SERIES

FAULT ISOLATOR BASE RE-314BI

FIRE ALARM CONTROL PANEL RE-102ET-REV-01

FIREMEN TELEPHONE SYSTEM EK-740

GOOSENECK MIC RE-60GM

HORN CUM STROBE SOUNDER RE-25SS

LED EMERGENCY LIGHT SELF CONTAINED RAVEL-LUMICZAR-LZR-XSM10

LED EXIT SIGN WITH SELF CONTAINED – WIRELESS TESTING FACILITY RAVEL-LUMICZAR-BT-XX-V2

LED EXIT SIGNAGE LIGHT – SELF CONTAINED – BASIC MODEL RAVEL-LUMICZAR-LZR-XSM01

LED EXIT SIGNAGE LIGHT – SELF CONTAINED - BASIC RAVEL-LUMICZAR-LZR-XSM02

LOOP POWERED SOUNDER 34.-RE-24ES_LOOP-SOUNDER

LOOP POWERED SOUNDER BASE RE-374BS_DS

MANUAL ABORT STATION 

Notifier FSP-851(A) Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. The FSP-851(A) photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-851T(A). The FSP- 851R(A) is a remote test capable detector for use with DNR(A)/DNRW duct detector housings. FSP-851(A) series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).

This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s intelligent addressable fire systems. All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors, part 5 for heat detectors and part 17 for short circuit isolators). The optical sensor (CAP320) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles. The photo-thermal sensor (CAPT340) will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC. The CAPT340 has day/night modes available, programmeable from the site installer software. The day mode uses the heat aspect of the sensor for areas which may have smoky environments during, for example working hours. The night mode uses a combination of A2S and smoke detection. If not programmed, the sensor defaults to dual mode. The heat sensor (CAH330) can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.

We are the Authorized Supplier and Distributor of Intelligent Addressable Fire Alarm System with Warranty AMC Repair Maintenance and Technical Manpower Supply Services. Addressable Fire Detection System provides complete control over your building and office warehouse hospital hotel floors to get informed immediately with proper location of the fire incident happened anywhere in the property. We are the wholesaler for intelligent smoke detectors with base, heat detector and Multi Technology Detectors with 1 Loop 2 Loop 4 Loop 6 Loop 8 Loop 10 Loop 12 Loop Fire Alarm Control Panels and Sounders Flashers etc. Our Design team provides complete site scanning and BOQ Design services on the basis of Project Floor Drawings having proper integrated safety system including Fire Alarm, Fire Fighting, Gas Flooding, Very Early Smoke Detection and Security System as per the customer requirements.